5.0 Mustang & Super FordsFeatured Vehicles
2001 Ford Mustang Bullitt - Paid in Fuel
Zac Freeman plans on beating his '01 Bullit like it owes him money
Zac Freeman was wheeling a $2,000 Fox Mustang when he graduated from welding school. Of course, once we graduate we all hope to land a paying gig, and that's exactly what panned out for Zac.
With a new gig, he was ready for a Mustang upgrade. "I saw that a local guy had this car for sale," speaking about the Bullitt you see here. "I didn't really care for green cars," Zac says, "but for some reason, I had to have it." The seller was the original owner, but it seems like he wasn't a true Bullitthead since Zac says the car, "didn't run for crap and the paint had been severely neglected—but I still had to have it."
Truthfully, Zac didn't know anything about Bullitts, and quite frankly, he didn't care. "I bought it, and that's when it began."
It being the transformation of a Bullitt that went from not running for crap to what you see here. Quite the jump, right?!
Zac wasn't used to owning a nice Mustang, and he had never really cared about what his car's paint looked like, but after a few weeks with the Bullitt, he was really bummed about the paint's condition. His friend Joe, however, assured him it could be rescued.
"I didn't really believe we could make it look all that much better," Zac says, "but I was willing to let him try." Joe was right, and after a few detailing sessions, Zac says the car "looked so much better." Joe told Zac as long as he took care of washing the car properly between details, it would continue to be nice.
Keeping it looking good, Zac added minor mods to the Bullitt to improve its driveability. That made the car more enjoyable, which is the goal for all of us. Zac took lots of road trips, did a lot of street racing, and overall just enjoyed being a hooligan in the Bullitt. All that came to an end when he hurt the engine while racing a friend and his nitrous'd '99 Cobra. Though Zac won the battle, he lost the war.
The Bullitt sat with a broken engine and transmission for over a year before Zac found the motivation to rebuild her. Patterson Racing built a 12:1 pump-gas, nitrous engine, to which Zac added a good 3650 five-speed manual transmission. Zac then installed the most hidden nitrous kit anyone had ever seen—or not seen.
"I raced the crap out of the car for the next year," Zac says. He only made one pass with the 3650, stock suspension, and nitrous. To maintain the hustle, he only sprayed it through First and Second gear, running an 11.62 at 118 mph with a 1.56 60-foot time. This was with a 150-shot.
"I then decided it was time to get more serious," Zac tells us. Out came the 3650, and in went a built 4R70W automatic with a manual valvebody, trans brake, and high-stall converter. The stock suspension pieces came out, exchanged for aftermarket tubular replacements. Weight was taken out of the car, and the nitrous hit was upped to a 235-shot. "Holy cow, it was fast," Zac enthused.
He took the Bullitt to a big street racing event around Kansas City, and was shocked at how well the car worked and how fast it was. Why haven't I done this sooner, Zac asked himself. He also fell in love with the automatic, and as a stick driver, that was probably hard for him to admit. However, after too many hits of the sauce, that engine decided it was done.
"When I took it out this time, I knew it was time to make some big changes," Zac says. He tore the engine apart, stripping everything from the engine compartment.
Zac had never wired anything. He'd never made brake lines, never made AN hoses, never built an engine, never done a set of 8.8 gears—none of that stuff. "I had no idea what I was getting myself into," he said. "I just knew what I wanted to end up with, and what I was fed up with in my engine bay."
Racing a nitrous car, he was used to pulling plugs, but number four was always a pain. "There was just so much stuff in that area," Zac says. Wiring, vacuum lines, heater core lines—he wanted it gone. "I also hated looking at the hydroboost," Zac says. He felt it took up too much room and there was no way to make it look good. He believed ABS was a joke with big n' littles, anyway. It was all just extra weight to Zac, and it had to go.
"It honestly snowballed," Zac says. "I really didn't intend on it ending up the way it did when I started," he adds.
Zac started taking everything out, cutting, splicing, soldering, heat-shrinking, hiding wires, "I became a monster." He can't imagine how many hours he has in the wiring alone. He hid the brake lines, the Hurst roll control solenoid, the fuel pressure regulator, vacuum lines, and boost controller solenoids. "I hid it all inside the fenders," Zac added.
He even did the well-known coolant mod and hid everything underneath the intake, along with the coolant temperature sensor. "I didn't want to see any of it."
Then he turned his attention to the engine. The one that came out of the car had blown out piston ring lands, a blown head gasket, a torched head, a burnt valve, and more. He had the cylinder head fixed and scrambled to find a set of pistons for $200.
Zac took the pistons to Patterson Racing to have the skirts ceramic coated and have them order a set of rings for them.
Once he had everything ready, Zac went to work putting it all back together. Remember, Zac had never built an engine before, so it was a learning experience. He had a buddy check his work, but Zac did it all. Once he was ready, a couple friends helped install the engine and transmission into the car.